Posts Tagged ‘intex pools’

How to connect Intex pipes to standard pool pipes

Tuesday, July 27th, 2010

Intex make great above ground swimming pools, the best on the market, which is why PoolStore only sell Intex pools but the pipes that come with the pools are a non-standard type and if you ever want to connect any non-intex item to your pool, like a heater for example, you will have to change from the Intex pipes to standard swimming pool pipes. This article will help you to do that.

Intex pools pools have two sizes of pipe. 1.25 inch for their smaller pools and 1.5 inch for their bigger pools

intex 1.5 inch pipe

Intex 1.5 (inch and a half) pipe

intex 1.25 inch pipe

Intex 1.25 (inch and a quarter) pipe

1.5 inch pipe

standard swimming pool 1.5 inch pipe

Standard swimming pool pipe is 1.5 inch class C ABS pipe and is usually white. There is also PVC pipe and that is usually grey in colour. Because pool pipes are 1.5 inch it makes it very difficult to attach the 1.25 inch pipe work to it but the 1.5 inch pipe is fairly easy.

What you need is a 1.5 inch hose tail. There are two types, threaded and plain

plain hose tail

Plain inch and a half hose tail

Threaded inch and a half hose tail

The first thing to note is that the smooth end of the Intex pipe will not fit in to anything other than another Intex fitting. You will have to cut it off. The hose tail will push fit in to the cut end of the intex pipe but it will not be water tight.  You can put a jublilee clip on it but because of the ridges in the Intex pipe it will not squeeze down tight.  It will need to be sealed with a bathroom type mastic sealant.

Having got the Intex pipe on to the hose tail you can now connect to standard swimming pool pipe and connections. You can screw in to a female thread with the threaded hose tail or glue on to any plain ended fitting with the plain hose tail.

For example if you were installing an EcoWarm heat pump, they have 1.5 inch female threads on their inlet and outlet. We would recomend putting a threaded union in to the heat pump and then glue the plain hose tail in to the plain end of the union. Then you can unscrew the union at any time to isolate the heat pump.

threaded socket union

One of the many uses of an Intex Easy Set Above Ground Pool

Friday, May 7th, 2010



There are lots of ways to relax or have fun in an Intex Easy Set above ground swimming pool.

Here is one that we are not sure we would recommend you try at home.

The New Intex Sand Filter

Tuesday, March 30th, 2010

Intex above ground swimming pools are synonymous with high quality and inovation and 2010 sees the introduction of a product that has been long awaited by many owners of Intex pools – a sand filter.

 

 

Up to now all Intex pools came with a combined pump and paper cartridge filter. The pumps are very good and whilst the paper filters pick out the dirt and debris in the water they need cleaning often and should be replaced from time to time.

 

In ground pools and the bigger above ground pools have sand filters. Sand filtration is the best and easiest way to filter swimming pool water. The water is pumped in at the top of the filter chamber and pressure from the pump forces the water down through a bed of sand. As the water passes through the sand bed the dirt and debris is left behind in the sand and clean water emerges via lateral pipes with fine slots in at the base of the filter. When the filter needs cleaning the water is pumped the oposite way, the sand “fluidises”, the dirt is lifted out and the dirty water is sent to waste. This is called backwashing. Sand filters can hold much more dirt than paper filters and don’t need washing as frequently.

 

Whilst there are many pump and filter combinations on the market they are all geared to inground pools with standard 1.5 inch solid pipe fittings. The difficulty always was adapting the fittings on them to work with the Intex pipework. The new Intex sand filter solves these problems because it is made to fit directly on to the non standard pipe fittings that are found on Intex pools. It also comes with adaptors to make it fit all other makes of above ground pool.

 

The filter is easy to assemble and requires just one 25kg bag of  “16-30″ grade filter sand.

 

If you are looking to replace your paper filter with a sand filter then the Intex sand filter is the obvious choice.